MACHLOG

Your production, in rupees.

Machlog is the production log for Indian machine shops. Operators log pieces and insert changes at the machine; you see output, rejections and tooling cost per piece, even without internet.

Free for 14 days, no card. Plans from ₹299 a month.

OD Turning
FLG-2210 · CNMG 120408 TFX-P25 · ₹420 an insert, 4 corners
Corner 2 of 4 · 37 pieces · about 51 left
0Usual life 88 pcs a corner
Pieces made 25
Made today85pcs
On this insert125pcs
Tooling per piece₹1.68

Try it. Save a few entries and watch the corner wear and the cost per piece fall; index when it is due.

Every corner, counted

Cutting
OD TurningCorner 2 of 4 · 52 pieces · about 36 left
In the machine
Due
OD TurningCorner 2 of 4 · 91 pieces · past the usual 88
Indexed
OD TurningCorner 3 of 4 · corner 2 lasted 91 pieces
Logged by Ravi, 11:42

Machlog learns the usual life of each insert from your own shop. A corner that breaks well before it is flagged as an early failure the same day, so a wrong grade or a bad speed does not repeat for the rest of the batch.

How Machlog works

Plan the job before the first cut.

The owner sets the operations in order and the tool for each one. The shop floor never edits it.

FLG-2210Process plan
Op-1 · Turning
OD TurningCNMG 120408 TFX-P25 · LT-01₹420 a set · 4 corners
GroovingMGMN 300 TFX-P25 · LT-01₹300 a set · 2 corners
Op-2 · VMC
Ø12 DrillingØ12 solid carbide drill · VMC-01₹2,800 a tool
One full load₹3,520
FLG-2210 — pieces madeToday so far 45
Logging as Ravi
48
Rejected
2
DimensionalTool markBurrSetup error
Tool change
No changeIndexedReplaced
Save entry
OverviewSharma Engineering Works
Made today175Yesterday 148, +18%
Rejected this week111.5%, mostly dimensional
Tooling spend, 30 days₹5,420Inserts and tools loaded
Tooling per good piece₹7.9930-day spend ÷ good pieces
To buy2 items · about ₹7,000
Ø12 solid carbide drillOut of stock 0 in stock · 1 used in 30 days
1order
CNMG 120408 TFX-P25At reorder level (10) 10 in stock · 6 used in 30 days
10order
Send list on WhatsApp

The message carries items and quantities only, no prices.

  1. Plan
  2. Log
  3. Watch
  4. Buy

What else it does

Every insert TOOLFLUX turning inserts is counted corner by corner. Shift proof Send on WhatsApp reaches your phone, the owner PIN Owner mode · Lock keeps costs private, and every entry backs up Backed up by itself.

TOOLFLUX — Sharma Engineering WorksMachining efficiency report · 10 Nov 2026
FLG-2210
ToolSetsUsual lifePiecesPer pieceNotes
OD Turning288704₹1.19OK
Grooving348270₹3.331 early failure
Ø12 Drilling1—300₹9.33First drill still cutting
Approved by

Any job prints as a black-and-white A4 report: each tool's sets, usual life, pieces and cost per piece, with early failures marked. Tape it to the file, hand it to your CA, or use it when a supplier promises longer tool life.

Operators see production only. Costs, reports and edits to past entries stay behind your PIN.

Read the setup guide

Pricing

Every plan has every feature and starts with 14 days free. Plans differ only in how many operator phones can log.

₹799a month

Up to 5 operator phones. For shops with 4 to 10 machines and operators on shifts.

Start the Shop trial

Start in two questions

Open Machlog in Chrome on any phone or PC, name your workshop, then plan your first job. Free for 14 days, no card, and nothing is deleted if you stop.