Why Your Inserts Are Failing Before Time
The culprit is almost never the insert itself. Grade mismatch, wrong cutting speed, interrupted cut geometry — learn the 6 real causes.
We don't supply catalogues — we solve machining problems. Material, tolerance, cycle time, tool life. TOOLFLUX engineers work at your machine to deliver measurable results.
Application engineers first. We work at your machine, understand your material and tolerances, then specify the exact tool for the job. If it underperforms, we come back and fix the application on-site.
Click any problem to see the root cause, exact fix, and expected improvement.
Six product families covering every machining operation. Select a category below — full specifications, grades, geometry options and size ranges. Every product backed by application support.




Machlog shows you what every shift produced, what was rejected, and what each component really cost in tooling. Operators log at the machine in seconds, and it works without internet. Free to try for 14 days.
Send the 2D drawing of your part and get back a STEP file that opens in Mastercam, checked against your drawing. Free for machine shops.
Every industry has its machining challenges. We understand the material families, tolerance requirements and production constraints of each sector — and we tool accordingly.
Enter your cutting parameters — Vc, feed, diameter. Get spindle speed and feed rate from exact machining formulas. No guesswork, no lookup tables.
n = Vc × 1000 / (π × D)Spindle speed (RPM)Vf = n × fnFeed rate (mm/min)MRR = Vc × fn × apMetal removal (cm³/min)n = Vc × 1000 / (π × D)Spindle speed (RPM)Vf = n × fnFeed rate (mm/min)L/D = L / DDepth ratio (for advisory)t = (L / Vf) × 60Cycle time per hole (s)n = Vc × 1000 / (π × D)Spindle speed (RPM)Vf = n × z × fzTable feed (mm/min)fn = fz × zFeed per rev (mm/rev)MRR = Vf × ap × ae / 1000Metal removal (cm³/min)CPP = Price / (Edges × Parts per Edge)Cost per part (₹)Saving = Competitor CPP − TOOLFLUX CPP₹ saved per partMonthly saving = Saving × monthly volume₹/monthField notes from our application engineers. The same advice we give standing at your machine.
The culprit is almost never the insert itself. Grade mismatch, wrong cutting speed, interrupted cut geometry — learn the 6 real causes.
ISO P and ISO M look similar on a spec sheet. In a cut, they behave like completely different metals. Here's why it matters.
Going deeper than 3xD without adjusting feed and speed is the fastest way to break a drill or get an oversize hole. The numbers that actually work.
Straight answers on what we supply, where we ship, and how to get a recommendation for your machine.
WhatsApp is the fastest way to reach us. Describe your material, machine, operation and what's going wrong. You'll get a specific recommendation for your setup, usually the same day.